Kling on cushion

How to use:

• Cut a piece of Kling-on slightly larger than the die and peel away the paper from the sticky side of the cushion, and press the die on to it.
• Use a sharp pair of scissors and cut the stamp design out, leaving a border of a few millimetres. NB it is important NOT to undercut the die. The cut should slope away from the design, not underneath it Practise on a corner of the sheet first . It may be better to cut on the left side of the die.
• Press the cushion side firmly on a clear acrylic block. The Kling-On will adhere time and time again to the acrylic block making it easy to use different designs on the same block.
• Stamp your design. Clean your stamp and store on a clear plastic sheet or holder.